RAM CLUTCHES Hydraulic Release Bearing, 93~95 ZR-1.  

For Single Disc, PUSH Release Style Clutch ONLY with the following flywheels;

1. Original Dual Mass Flywheel, PN 10174481,  OR  
2. Jerrys Gaskets 18# PN 10202538 & 22# PN 10202537 Custom Aluminum Billet Flywheels   

Designed to replace the "pull release" clutch system installed originally in the ZR-1 Corvette.  The RAM Release Bearing can be rebuilt and all necessary parts are available.

The original pull release clutch in the ZR-1 works well enough, but now that parts like the hydraulic slave cylinder, clutch fork, ball stud and a good quality throwout/release bearing are very difficult to locate and expensive, it's time to save time and money.  Converting to a RAM Hydraulic Clutch Release Bearing replaces all of those parts and for less cost than a clutch fork alone, and is renewable stock for Jerry's Gaskets.  Apart from all of that, it works great!

IMPORTANT NOTE: Early model ZR-1's (90~92) have the transmission with the large Front Tube (appx 1.373" dia).  Late model 93' through 95 have the small dia Front Tube (appx 1.315" dia).  Also, many ZR-1 transmissions have been replaced or modified and no longer have the same ZF S6-40 installed. Please confirm SIZE OF COLLAR/GUIDE TUBE before ordering to avoid added costs and delays..