Silicone Air Inlet Duct. Fits 90~95 ZR-1 LT5 engine. "Jerrys Gaskets" branding can be turned to the underside if preferred, during installation. Developed for higher capacity air flow and prevention of collapse during wide open throttle conditions, as the stock accordion air duct is prone to do.

Stock, original duct clamps are not quite large enough to use with the thicker silicone duct.  Apart from the size issue, stock clamps are not strong enough nor are they designed specifically with rolled edges and smooth underside to protect silicone. We highly recommend our SS Clamps, designed for this specific application, to protect your new duct. Improves the appearance and keeps the duct securely in position. Clamp, Inlet Air Duct, SS 1990-95 [4E3].

NOTE: The air duct is purposely sized to be slightly longer than the stock air duct.  The Air Duct should be installed with the Air Horn end correctly located and the clamp tightened to hold it in position.  Be sure the duct & clamp clear the AC Compressor.  Install the Air Filter Housing and locate the clamp to its final position.  If the duct appears too long, simply mark a line parallel to the clamp as a trimming reference.  Remove the duct and cut the excess away with a sharp blade and re-install. 

Photo submitted by our good friend & customer Marcos Gil in Spain!